Translations:RGB-Pi SCART Installation/2/en

From RGB-Pi Wiki
Jump to: navigation, search
1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi

Cable.jpg

2. We recommend the use of this power supply as the only one with RGB-Pi approval to avoid undervoltages and slowdowns because supply 5.25v, If you are from UE, need one plug converter too.

Psu2.png

3. That's all! For instructions on how to install RGB-Pi OS, please visit OS Installation
Retrieved from "https://www.mortaca.com/rgb-pi/wiki/index.php?title=Translations:RGB-Pi_SCART_Installation/2/en&oldid=40750"