RGB-Pi SCART Instalación
Revision as of 19:17, 18 June 2021 by ATG (talk | contribs) (Created page with "{| |- |1. Conecta el cable al GPIO. El cable tiene que mirar hacia el exterior de la Raspberry Pi 320px|border |- |2. We recommend the use of [https://rover...")
Steps
| 1. Conecta el cable al GPIO. El cable tiene que mirar hacia el exterior de la Raspberry Pi
|
| 2. We recommend the use of this power supply as the only one with RGB-Pi approval to avoid undervoltages and slowdowns because supply 5.25v, If you are from UE, need one plug converter too.
|
| 3. That's all! For instructions on how to install RGB-Pi OS, please visit OS Installation |
