RGB-Pi SCART Installation

From RGB-Pi Wiki

Revision as of 14:30, 2 May 2020 by RTomas (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Steps

1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi

2. That's all! For instructions on how to install RGB-Pi OS, please visit the corresponding section in this wiki.

Retrieved from "https://www.mortaca.com/rgb-pi/wiki/index.php?title=RGB-Pi_SCART_Installation&oldid=40087"