RGB-Pi SCART Installation

From RGB-Pi Wiki

Revision as of 20:02, 26 April 2020 by RTomas (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Steps

1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi

2. Download the latest version of the RGB-Pi OS from rgb-pi.com

3. Grab any 8GB or greater MicroSD card (all content will be deleted)

4. Download Etcher from etcher.io to write the image to the SD

5. Burn the image WITHOUT DECOMPRESSING to the SD card and perform a SAFE EXTRACTION

6. You can now plug the SD into the Raspberry Pi, connect to the TV, and power on.

Retrieved from "https://www.mortaca.com/rgb-pi/wiki/index.php?title=RGB-Pi_SCART_Installation&oldid=40036"