RGB-Pi SCART Installation
Revision as of 20:01, 26 April 2020 by RTomas (talk | contribs) (RTomas moved page Instrucciones de instalación Scart to RGB-Pi SCART Installation: title change)
RGB-Pi SCART installation instructions
| Steps: |
| 1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi |
| 2. Download the latest version of the RGB-Pi OS from rgb-pi.com |
| 3. Grab any 8GB or greater MicroSD card (all content will be deleted) |
| 4. Download Etcher from etcher.io to write the image to the SD |
| 5. Burn the image WITHOUT DECOMPRESSING to the SD card and perform a SAFE EXTRACTION |
| 6. You can now plug the SD into the Raspberry Pi, connect to the TV, and power on. |
