Difference between revisions of "OS First Boot"

Revision as of 03:10, 2 May 2020

The following points describe the steps to be performed after powering on your Raspberry for the first time, when using a new copy of the RGB-Pi OS:

The boot logo will be displayed.
Wait until the system expands the SD card to its maximum size.
Wait for the system to reboot.
Perform the joystick button mapping following the on screen instructions (this screen won't be displayed if there is not any joystick connected).
Note: you can maintain any button pressed to skip any button mapping configuration.
Select your language.
Perform the UI and Screen image adjustments.
Select the desired skin.
Note: Classic Purple is the official skin used in RGB-Pi OS v1, and Terra is the official skin created specifically for RGB-Pi v2.
That's all! after finishing the configuration, you'll be presented in the system menu screen.

Revision as of 03:08, 2 May 2020 (view source) RTomas (talk \| contribs) ← Older edit		Revision as of 03:10, 2 May 2020 (view source) RTomas (talk \| contribs) Newer edit →
Line 1:		Line 1:
−	~~These are~~ the ~~step when~~ powering on your Raspberry for the first time using a new copy of the OS:	+	The following points describe the steps to be performed after powering on your Raspberry for the first time, when using a new copy of the RGB-Pi OS:

	# The boot logo will be displayed.		# The boot logo will be displayed.