Difference between revisions of "RGB-Pi SCART Installation"
| Line 5: | Line 5: | ||
|1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi | |1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi | ||
|- | |- | ||
| − | |2. That's all! | + | |2. That's all! For instructions on how to install RGB-Pi OS, please visit the corresponding section in this wiki. |
|- | |- | ||
|} | |} | ||
Revision as of 14:11, 2 May 2020
Steps
| 1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi |
| 2. That's all! For instructions on how to install RGB-Pi OS, please visit the corresponding section in this wiki. |
