Difference between revisions of "RGB-Pi SCART Installation"

Revision as of 14:07, 2 May 2020

Steps

1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi

2. That's all! Please, visit the RGB-Pi OS section in this wiki to learn how to install and configure the system.

@@ Line 5: / Line 5: @@
 |1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi
 |-
-|2. Download the latest version of the RGB-Pi OS from rgb-pi.com
+|2. That's all! Please, visit the RGB-Pi OS section in this wiki to learn how to install and configure the system.
-|-
-|3. Grab any 8GB or greater MicroSD card (all content will be deleted)
-|-
-|4. Download Etcher from etcher.io to write the image to the SD
-|-
-|5. Burn the image '''WITHOUT DECOMPRESSING''' to the SD card and perform a '''SAFE EXTRACTION'''
-|-
-|6. You can now plug the SD into the Raspberry Pi, connect to the TV, and power on.
 |-
 |}