Difference between revisions of "RGB-Pi SCART Installation"
m (RTomas moved page Instrucciones de instalación Scart to RGB-Pi SCART Installation: title change) |
|||
| Line 1: | Line 1: | ||
| − | ''' | + | '''Steps''' |
{| | {| | ||
| − | |||
|- | |- | ||
|1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi | |1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi | ||
Revision as of 20:02, 26 April 2020
Steps
| 1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi |
| 2. Download the latest version of the RGB-Pi OS from rgb-pi.com |
| 3. Grab any 8GB or greater MicroSD card (all content will be deleted) |
| 4. Download Etcher from etcher.io to write the image to the SD |
| 5. Burn the image WITHOUT DECOMPRESSING to the SD card and perform a SAFE EXTRACTION |
| 6. You can now plug the SD into the Raspberry Pi, connect to the TV, and power on. |
