View source for OS First Boot/en

<languages/>
The following points describe the steps to be performed after powering on your Raspberry for the first time, when using a new copy of the RGB-Pi OS:

{|
|-
|1. The boot logo will be displayed.
[[File:01_boot_4.png|border]]
|-
|2. Wait until the system expands the SD card to its maximum size.
[[File:01_expand_01.png|border]]
|-
|3. Wait for the system to reboot.
[[File:01_expand_02.png|border]]
|-
|4. Perform the joystick button mapping following the on screen instructions (this screen won't be displayed if there is not any joystick connected or if you are using the JAMMA board).<br>'''''Note''': you can maintain any button pressed to skip any button mapping configuration and on the end.''<br>'''Hotkey''': is recommended to be start or select or other button that is not used to play.''
[[File:01_mapping.png|border]]
|-
|5.Select your language.
[[File:01_lang.png|border]]
|-
|6. Perform the UI and Screen image adjustments.
[[File:01_ui_position.png|border]][[File:01_game_pos.png|border]]
|-
|7. Select the desired skin.<br>'''''Note''': '''Classic Purple''' is the official skin used in RGB-Pi OS v1, and '''Terra''' is the official skin created specifically for RGB-Pi v2.''
[[File:01_skin.png|border]]
|-
|8. That's all! after finishing the configuration, you'll be presented in the system menu screen.
[[File:01_systems.png|border]]
|-
|9. Now you need to add games, you can continue on [[Special:MyLanguage/Adding_ROMs|Adding ROMs]]
|}